Skip to content
IntelliTone™ Pro 200 Toner and Probe Kit

IntelliTone™ Pro 200 Toner and Probe Kit

Sold out
$537.90 - $537.90
$537.90
$537.90 - $537.90
$537.90
- +
Availability:
Out of stock

Key Features:

  • Locates cables safely and effectively on active networks
  • Kit includes IntelliTone™ toner, probe, adapters, patch cables, and test leads (carry case sold separately)
  • Verifies twisted pair installation with end to end continuity test
  • IntelliTone™ digital toning eliminates noise and false signals
  • SmartTone analog toning isolates individual wire pairs

    GET ADVANCED VISION FOR TRACING AND LOCATING NETWORK CABLES MORE EFFECTIVELY AT PATCH PANELS, SWITCHES, TERMINATION BLOCKS, OR HIDDEN WITHIN BUNDLES. OUR NEW INTELLITONE PRO 200 LAN TONER AND PROBE KITS FINDS THE CABLES OTHERS CAN’T

    The IntelliTone™ Pro 200 LAN Toner and Probe Series from Fluke Networks is the first Network cable tester to offer digital and analog signaling all in one network toner and probe. That means it’s equipped with the most powerful cable tracing and location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate wire pairs and trace voice, audio, and video cabling. The IntelliTone™ Pro 200 LAN Toner and Probe Series from Fluke Networks gives you superior vision for tracing and locating cables hidden in floors, ceilings, walls, and in bundles. This network cable toner and probe’s breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.

    Operating temperature 0°C to 40°C
    Storage temperature -20°C to°C
    Operating relative humidity)
    (% RH without condensation)    		 95% (10°C to 35°C)
    75% (35°C to 40°C)
    Uncontrolled <10°C
    Vibration Random, 2g, 5Hz-500Hz
    Shock 1m drop test
    Safety EN 61010-1, Category: None
    Altitude 3000m
    EMC EN 61326-1, FCC Part 15 B
    Battery type and life 9V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical
    Applications Copper cabling media including;
    75 or 50 Ohm Coaxial cable, two Conductor control, security, generic cabling.
    10Base-T or 10/100Base-T Datacom networks, UTP cable, Shielded Twisted Pair supported in Cable Map function of the IntelliTone 200
    Dimensions 14.1cm x 7.5cm x 3.2cm
    Display LED
    Control Thumbwheel switch
    Toner interface Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling. F Connector for coaxial cabling Banana Jack Plugs (2) - two conductor wiring
    Toner frequency IntelliTone™ signal: encoded digital signal Analog SmartTone signal: 500 - 1200Hz, 4 songs
    Ouptut power 5V p-p
    Auto power down Turns off automatically after 2.5 hours of inactivity
    Dimensions 22.2cm x 4.8cm x 3.2cm
    Display (8) LED indicators, Sync LED indicator
    Audio IntelliTone: Microprocessor controlled audio files Analog: Detected toner signal
    Control Thumbwheel switch, volume control wheel
    Tone detection Detects IntelliTone™ digital signal for Locate, Isolate, and Cable Map Detects analog SmartTone signal (500-1200Hz) and other analog toners.
    Toner interface Main Mod8 port for Cable Map on all 4 pairs of UTP / STP cabling.
    Auto power down Turns off automatically after 1 hour of inactivity

    GET ADVANCED VISION FOR TRACING AND LOCATING NETWORK CABLES MORE EFFECTIVELY AT PATCH PANELS, SWITCHES, TERMINATION BLOCKS, OR HIDDEN WITHIN BUNDLES. OUR NEW INTELLITONE PRO 200 LAN TONER AND PROBE KITS FINDS THE CABLES OTHERS CAN’T

    The IntelliTone™ Pro 200 LAN Toner and Probe Series from Fluke Networks is the first Network cable tester to offer digital and analog signaling all in one network toner and probe. That means it’s equipped with the most powerful cable tracing and location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate wire pairs and trace voice, audio, and video cabling. The IntelliTone™ Pro 200 LAN Toner and Probe Series from Fluke Networks gives you superior vision for tracing and locating cables hidden in floors, ceilings, walls, and in bundles. This network cable toner and probe’s breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.

    Operating temperature 0°C to 40°C
    Storage temperature -20°C to°C
    Operating relative humidity)
    (% RH without condensation)    		 95% (10°C to 35°C)
    75% (35°C to 40°C)
    Uncontrolled <10°C
    Vibration Random, 2g, 5Hz-500Hz
    Shock 1m drop test
    Safety EN 61010-1, Category: None
    Altitude 3000m
    EMC EN 61326-1, FCC Part 15 B
    Battery type and life 9V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical
    Applications Copper cabling media including;
    75 or 50 Ohm Coaxial cable, two Conductor control, security, generic cabling.
    10Base-T or 10/100Base-T Datacom networks, UTP cable, Shielded Twisted Pair supported in Cable Map function of the IntelliTone 200

    Dimensions 14.1cm x 7.5cm x 3.2cm
    Display LED
    Control Thumbwheel switch
    Toner interface Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling. F Connector for coaxial cabling Banana Jack Plugs (2) - two conductor wiring
    Toner frequency IntelliTone™ signal: encoded digital signal Analog SmartTone signal: 500 - 1200Hz, 4 songs
    Ouptut power 5V p-p
    Auto power down Turns off automatically after 2.5 hours of inactivity

    Dimensions 22.2cm x 4.8cm x 3.2cm
    Display (8) LED indicators, Sync LED indicator
    Audio IntelliTone: Microprocessor controlled audio files Analog: Detected toner signal
    Control Thumbwheel switch, volume control wheel
    Tone detection Detects IntelliTone™ digital signal for Locate, Isolate, and Cable Map Detects analog SmartTone signal (500-1200Hz) and other analog toners.
    Toner interface Main Mod8 port for Cable Map on all 4 pairs of UTP / STP cabling.
    Auto power down Turns off automatically after 1 hour of inactivity
    FNet_White_X_RGB.png__PID:629bdbbc-a1bb-423d-9e0c-cc20e9b6c972

    At CableHUB, we are proud to exclusively offer the entire range of Fluke Networks products. Fluke Networks stands as a beacon of quality and innovation in the network tools industry, and we're dedicated to bringing this excellence directly to you.

    COllage No BG.png__PID:0e9e629b-dbbc-41bb-a23d-de0ccc20e9b6
    COllage No BG.png__PID:0e9e629b-dbbc-41bb-a23d-de0ccc20e9b6

    Precision, Innovation, and Reliability in Network Solutions

    CableHUB is proud to offer an extensive range of Fluke Networks products, renowned for their unrivaled quality and performance. Ideal for network administrators, IT professionals, and tech enthusiasts, Fluke Networks tools stand out with their accuracy, durability, and cutting-edge technology. Our comprehensive selection includes everything from advanced cable testers to sophisticated network analyzers, ensuring you have the perfect tool for every task.

    Fluke Networks is synonymous with innovation and reliability, a reputation built on their commitment to customer satisfaction and continuous improvement. To give you additional peace of mind, our products are backed by a standard one-year warranty, with an option for an extended warranty for extended protection and predictable budgeting.

    Opt for the extended warranty and benefit from prioritized service, faster repair cycles, and comprehensive coverage, including routine calibration and repair services. Trust CableHUB for all your Fluke Networks needs, where quality and customer service are always our top priorities.

    CableHUB is proud to offer an extensive range of Fluke Networks products, renowned for their unrivaled quality and performance. Ideal for network administrators, IT professionals, and tech enthusiasts, Fluke Networks tools stand out with their accuracy, durability, and cutting-edge technology. Our comprehensive selection includes everything from advanced cable testers to sophisticated network analyzers, ensuring you have the perfect tool for every task.

    Compare products

    {"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

    Select first item to compare

    Select second item to compare

    Select third item to compare

    Compare